The H&S Throttle V2 is our second-generation replacement and upgrade for compatible STACYC 12eDRIVE and 16eDRIVE models with standard 22.2mm (7/8-inch) handlebars.
Compared with the original STACYC throttle, the H&S V2 uses a slimmer throttle tube for a smaller overall grip diameter. It retains all OEM STACYC speed settings and LED functions while adding an improved return spring, an updated switch, and the current H&S V2 wiring harness.
FEATURES
Second-generation H&S Throttle V2 design
Slimmer throttle tube for a smaller grip diameter
Improved return spring
Updated switch for improved reliability
Retains all OEM STACYC speed settings and LED functions
LED power and battery-level indicators
Quick-release electrical connector
Current H&S V2 wiring harness included
Designed as a replacement or ergonomic upgrade
H&S-developed product for STACYC 12eDRIVE and 16eDRIVE models
FITMENT
Designed for compatible models using standard 22.2mm (7/8-inch) handlebar ends:
STACYC 12eDRIVE with brushed or brushless motor
STACYC 16eDRIVE with brushed or brushless motor
Compatible KTM, GASGAS, and Husqvarna-branded 12eDRIVE and 16eDRIVE models using 22.2mm (7/8-inch) handlebar ends
IMPORTANT FITMENT INFORMATION
This throttle is designed for standard 22.2mm (7/8-inch) handlebars.
It is not compatible with:
H&S 19mm handlebar conversion kits
STACYC models already equipped with 19mm controls
STACYC 16eDRIVE Elite
STACYC 18eDRIVE
STACYC 20eDRIVE
Some newer STACYC 12eDRIVE & 16eDRIVE models use 19mm controls. Measure the handlebar end where the throttle mounts before ordering:
Approximately 22mm (7/8-inch): Order this H&S Throttle V2
Approximately 19mm: Use the dedicated H&S 19mm throttle or conversion-kit components
WHY REPLACE OR UPGRADE IT?
The H&S Throttle V2 can replace a damaged, worn, sticking, or unreliable stock throttle. It can also be used as an ergonomic upgrade for riders who have difficulty comfortably gripping or rotating the larger stock throttle.
The slimmer design pairs especially well with ODI Mini Grips for riders with smaller hands.
GRIPS SOLD SEPARATELY
Grips are not included.
We recommend ODI Mini Grips for a smaller overall grip diameter:
Current H&S V2 wiring harness with quick-release connection
NOTES
The original H&S V1 wiring cable and the current V2 throttle are not interchangeable.
This throttle uses two green LEDs to represent the same status shown as one green LED on the OEM STACYC throttle. When an OEM STACYC troubleshooting guide or LED code refers to one green LED, two green LEDs on the H&S Throttle V2 should be read the same way.
The product video may show a pre-production version used to demonstrate durability.
Verify the handlebar-end diameter before ordering.
Installation of an aftermarket throttle may affect portions of the STACYC factory warranty related to the throttle, electrical system, controller, or drivetrain. By installing this product, the customer accepts responsibility for any warranty limitations established by STACYC.
My son broke 2 stock housings, one per month. I installed this Unit to see if it could handle the stress. It has been two weeks, so far so good, but only time will tell.
