• H&S 22mm bar riser kit with colored stem for STACYC 12eDRIVE and 16eDRIVE
  • H&S 22mm STACYC riser handlebar, alternate view
  • H&S 22mm STACYC riser handlebar detail
  • H&S 22mm riser handlebar with 4-inch rise for STACYC 12eDRIVE and 16eDRIVE
  • H&S stem bar clamp, installed view
  • H&S stem bar clamp, side view
  • H&S stem bar clamp, clamp detail
  • H&S stem bar clamp, additional product view
  • H&S stem bar clamp for STACYC 22mm riser kit
  • H&S stem bar clamp, alternate product view
  • H&S stem bar clamp, alternate clamp view
  • H&S stem bar clamp, alternate color
  • H&S Stem Bar Clamp
1 13

H&S Motorsports, LLC.

H&S 22mm Bar Riser Kit for STACYC 12eDRIVE & 16eDRIVE

H&S 22mm Bar Riser Kit for STACYC 12eDRIVE & 16eDRIVE

$59.95
$74.90 $59.95
Sale Sold out
H&S Stem Bar Clamp (Color)

The H&S 22mm Bar Riser Kit gives growing STACYC 12eDRIVE and 16eDRIVE riders a taller riding position while retaining the original 22mm throttle, grips, and brake controls.

This is the complete 22mm handlebar setup. It combines the H&S 4-inch-rise handlebar with a colored 25.4mm front-load stem and the fork-tube spacer needed for the shorter H&S stem.

Features

  • 22mm handlebar ends for the throttle and grips
  • 25.4mm center clamp diameter
  • Approximately 4-inch rise
  • 560mm overall width
  • Colored H&S stem and bar clamp
  • 10mm fork-tube spacer
  • Aluminum handlebar construction
  • No cutting or drilling required
  • Retains the existing 22mm throttle and controls

Fitment

Designed for:

  • STACYC 12eDRIVE with 22mm controls
  • STACYC 16eDRIVE with 22mm controls

This kit can also replace the 22.2mm top-load stem used on:

  • KTM-branded STACYC models
  • GASGAS-branded STACYC models
  • Husqvarna-branded STACYC models
  • STACYC models equipped with an OEM riser-bar kit

All H&S handlebars use a 25.4mm center clamp. The included H&S stem converts these bikes from the 22.2mm top-load stem to the correct 25.4mm front-load setup.

What's Included

  • H&S 22mm riser handlebar
  • H&S colored 25.4mm stem and bar clamp
  • 10mm fork-tube spacer

Important

This kit is for bikes using 22mm throttles and grips. It is not compatible with 19mm throttles or 19mm control setups.

If the bike already has a compatible 25.4mm front-load stem and does not need the spacer or colored stem, the standalone H&S 22mm Riser Handlebar may be the better option.

View full details